Fog light adjustment

/ 9-5 (9600) / 2003 / 3. Electrical System / Lighting and signalling systems / Adjustment/replacement / Fog light adjustment

1.	Measure the distance between the centre of the lens and the floor. Mark the wall (at 90° to the lens) with a cross at the same height.

2.	Switch on the fog lights.

3.	Turn the adjusting screw until the light is below the cross by approximately 1-2% of the distance between the car and the wall (e.g. 10-20 cm under the cross if the distance between the car and the wall is 10 m).

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.