B1215
Read the instructions below then start the fault diagnostic procedure.
Symptom: Interior lighting does not work.
B1215 |
Conditions
The output is provided with overload protection which shuts it off in the event of an excessive load. When this occurs, a diagnostic trouble code will be generated.DTCs are not generated if the voltage is below 11 V and the diagnostic communication is in use.
Diagnostic help
Check that the wattage of the bulbs is correct.If bulbs of too high a wattage are fitted, DTC B1215 can be generated.
To reset the overload protection, turn the ignition key to OFF and then back to ON.
Important | ||
The DICE control module can be damaged if a bulb of the wrong wattage is fitted. |
||