Speedometer
Read the instructions below then start the fault diagnostic procedure.
Symptom: Speedometer reads 0 km/h.
| Speedometer |
Fault symptoms
Speedometer reads 0 km/h.
Diagnostic help
A speedometer reading can be obtained with the diagnostic tool.The speedometer can be activated with the diagnostic tool.
Check the wiring harness
Jiggle the wiring harness at several points and in different directions to detect intermittent breaks and short-circuits in the leads. Observe the multimeter, test lamp or diagnostic tool during the test.This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
