Main unit, audio (5D)

/ 9-5 (9600) / 2003 / 3. Electrical System / Navigation with Audio / Adjustment/replacement / Main unit, audio (5D)

To remove

1.	Open the tailgate and rear doors.

2.	Lower the rear seat backrests.

3.	Remove the luggage compartment floor using the clips in the front edge and the handle at the rear edge.

4.	Remove the trim over the spare wheel, 3 clips and 2 nuts in the front edge.

5.	Unplug the rear connector.

6.	Remove the nuts.

7.	Remove the cable clips.

8.	Unplug the front connector.

9.	Remove the main unit from the brackets.

To fit

1.	Fit the main unit in the brackets.

2.	Plug in the front connector.

3.	Fit the nuts.

4.	Plug in the rear connector.

5.	Fit the trim over the spare wheel, 3 clips and 2 nuts in the front edge.

6.	Refit the luggage compartment floor.

7.	Raise the backrests to the upright position.

8.	Close the tailgate and rear doors.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.