No or poor sound when using navigation

Read the instructions below then start the fault diagnostic procedure.

Symptom: No or poor sound from one or more speakers when using navigation.

No or poor sound when using navigation

Fault symptom

No or poor sound from one or more speakers when using navigation.

Preconditions

Ignition ON.

Conditions

Switch Nav/Tele must be connected. There must be a power supply and grounding. Check both connectors for faulty pins and oxidation.

Diagnostic help

Sound works properly in radio mode.

Reset the system before starting fault diagnosis and recalibrate.

Check switches for oxidation and faulty pins. Check several points and directions of the wiring harness to detect any intermittent open or short-circuits.

See also the description of read values under ”General fault diagnosis” for more information.