No or poor sound when using the CD changer
Read the instructions below then start the fault diagnostic procedure.
Symptom: No or poor sound from one or more speakers when playing CDs.
No or poor sound when using the CD changer |
Fault symptom
No or poor sound from one or more speakers when playing CDs.Preconditions
Ignition ON.Conditions
Switch Nav/Tele must be connected. There must be a power supply and grounding. Check both connectors for faulty pins and oxidation.Diagnostic help
Sound works properly in radio mode.Reset the system before starting fault diagnosis and recalibrate.
Check switches for oxidation and faulty pins. Check several points and directions of the wiring harness to detect any intermittent open or short-circuits.
See also the description of read values under ”General fault diagnosis” for more information.