SAAB WIS ONLINE

Fluid delivery hoses, upper/lower (V6)

Fluid delivery hoses, upper/lower (V6)

To remove


1. Remove the battery cover and the battery.

2. Remove the MAXI fuse board and place it to one side. Remove the battery tray.


3. Remove the upper banjo bolt

4. Raise the car.

5. Place an oil pan under the transmission to collect fluid spill.

6. Remove the banjo screws fro the transmission and plug the holes. Use e.g. plug, part no. 91 32 929, and seal, part no. 91 32 937.


7. Remove the upper oil delivery pipe.

8. Remove the lower banjo bolt from the radiator. Remove the hose.


Fitting

Note

Change the seals in the banjo bolts.



1. Fit the lower hose loosely. Note the securement between the pipes.

2. Lower the car and fit the upper pipe loosely.


3. Raise the car and tighten the lower hose to the radiator.

Tightening torque 27 Nm (20 lbf ft)

4. Fit and tighten the banjo bolts to the gearbox.

Tightening torque: 27 Nm (20 lbf ft)


5. Lower the car to the floor.

6. Tighten the upper banjo bolt.

Tightening torque 27 Nm (20 lbf ft)


7. Fit the battery tray, MAXI fuse board, battery and battery cover.

8. Fill with transmission fluid to the correct level. See Automatic transmission, fluid level .

9. Set the right time on the clock.