ABS warning lamp fails to come on.
Read the instructions below then
start the fault diagnostic procedure.
Symptom: The ABS warning lamp does not come on. (The ABS warning-lamp test is activated when the ignition is switched on. During this test, the lamp should come on for about 3 seconds.)
|
ABS warning lamp fails to come on.
|
Fault symptoms
The ABS warning lamp does not come on. (The ABS warning-lamp test is activated when the ignition is switched on. During this test, the lamp should come on for about 3 seconds.)
Diagnostic help
The ABS warning lamp can be activated using the diagnostic tool.
-
|
Select "ABS warning lamp".
|
Conditions
Fault in circuit between pin 21 of the ABS control module and the ABS warning lamp on the MIU.