Brake pedal, RHD
Brake pedal, RHD |
To remove |
1. |
Move the seat all the way back.
|
2. |
Remove the brake servo unit, see
Brake servo, V6 diesel, RHD
or
Brake servo, RHD
.
|
3. |
Remove the retaining nuts from the brake servo bracket/pedal assembly.
|
4. |
Remove the dashboard, see
Dashboard
.
|
5. |
Loosen the steering shaft UJ from the steering gear without separating the splines.
|
6. |
Unplug the pedal switch connections.
|
7. |
Undo the steering column assembly mounting to the body and pedal bracket, and move it as far back as possible.
|
8. |
Lift out the pedal assembly.
|
To fit |
1. |
Fit the pedal assembly loosely to the steering column assembly and place the foam rubber damper in position between the pedal assemblies.
|
2. |
Fit the steering shaft UJ.
Tightening torque 25 Nm (18 lbf ft). |
3. |
Tighten the pedal assembly nuts in the engine bay.
|
4. |
Fit the brake servo unit, see
Fitting the brake servo, V6 diesel
or
Fitting the brake servo
.
|
5. |
Fit the steering column assembly to the body.
|
6. |
Tighten the bolts for the pedal assembly/assemblies to the steering column assembly.
|
7. |
Fit the pedal switches.
|
8. |
Plug in the pedal switches and adjust them.
|
9. |
Fit the dashboard, see
Fitting the dashboard
.
|
10. |
Reset the clock and radio code, etc.
|