Hydraulic body, front wheel, overhaul
Hydraulic body, front wheel, overhaul |
1. |
Remove the hydraulic body, see
.
|
2. |
Remove the brake pads.
|
3. |
Clean the hydraulic body.
|
4. |
Press out the brake piston by blowing compressed air through the hose connection. Use a brake pad as a stop.
|
5. |
Remove the dust cap and piston seal.
|
6. |
Check for damage due to wear.
|
To assemble |
1. |
Lubricate the piston sealing ring with the grease supplied in the kit. Also pack the dust cap with grease.
|
2. |
Fit the new piston seal in the brake cylinder's inner groove.
|
3. |
Fit the dust cap over the brake piston.
|
4. |
Press the dust cap's collar into the brake cylinder's outer groove.
|
5. |
Press the piston into the brake cylinder by such an amount that the dust cap fastens in the brake piston's groove.
|
6. |
Fit the brake pads.
|
7. |
Fit the hydraulic body, see
.
|