Changing the rear bumper shell/cellular block, 4D
Changing the rear bumper shell/cellular block, 4D |
To remove |
1. |
Remove the bumper. See
Rear bumper, 4D
Lay it on a well protected workbench.
|
2. |
Loosen the upper cellular block from the protective shell. Lift it out from the bumper rail (it is wedged into the bumper rail).
|
3. |
Remove the two cellular blocks that sit on each side of the protective shell. Loosen the bumper rail from the clips securing it to the protective shell.
|
4. |
Loosen the cellular block from the protective shell (wedged into the protective shell's retaining wedges).
|
To fit |
1. |
Press the cellular block into the protective shell's retaining wedges.
|
2. |
Fit the bumper rail.
|
3. |
Fit the upper cellular block.
|
4. |
Fit the two cellular blocks on the sides of the protective shell.
|
5. |
Fit the bumper on the car. See
Rear bumper, 4D.
|