SAAB WIS ONLINE

Rear protective moulding 4D

Rear protective moulding 4D

To remove


1. Use 82 93 474 Removal tool .

2. First remove the corner decor mouldings by carefully inserting the tool under the corner of the moulding. Then pull the clips from the bumper shell.


3. Carefully insert the tool under the corner of the moulding.

Carefully pull the clips from the bumper shell.

Note

For cars equipped with Saab Parking Assistance (SPA):

Pull out the clips a little at a time to the unplug the connectors.



To fit

Note

For cars equipped with Saab Parking Assistance (SPA):

Attach the connectors.



1. Fit the protective moulding by using the guide lug to position it correctly.


2. Press in the moulding.

3. Fit the corner mouldings by using the guide lug to position them correctly. Press in the mouldings.


4. Make sure that the clips are secure in the bumper shell.