B2360
Read the instructions below then
start the fault diagnostic procedure.
Symptom: No cold from the A/C system.
A/C Pressure Sensor. Short to Ground
A/C Pressure Sensor. Open Circuit / Short to B+
Fault symptoms
No cold from the A/C system.
Conditions
Short to ground is set if:
•
|
the control module's pin 9 is short circuited to ground.
|
•
|
the voltage is below normal measuring range.
|
Open Circuit/Short to B+ is set if:
•
|
the control module's pin 9 is short circuited to B+.
|
•
|
the voltage is above normal measuring range.
|
Diagnostic help
The pressure in the A/C system can be read using the diagnostic tool.
In the event of an open circuit in the wiring DICE switches off power supply (pin 38) 0.5s after ignition.