SAAB WIS ONLINE

Drive belt for auxiliaries

Drive belt for auxiliaries

To remove


1. Raise the car.

2. Remove the lower engine cover.


3. Remove the belt circuit's cover.

4. Carefully and slowly release the tension of the belt tensioner. Remove the multigroove V-belt.



To fit


1. Fit a multigroove V-belt on all belt pulleys.


2. Carefully and slowly release the tension of the belt tensioner. Route the belt over the belt tensioner. Check that the belt is correctly seated on all the pulleys.

3. Fit the belt circuit's cover.


4. Fit the lower engine cover and lower the car.

5. Start the engine and check functionality.