Fan motor
Fan motor |
1. |
Remove the radiator fan,
.
|
2. |
Undo the fan cowl fasteners (A) (snap up).
|
3. |
Release the connector from the clip (B) using a screwdriver.
|
4. |
Undo the screws holding the fan motor (C).
|
5. |
Lift away the motor with rotor blades (D).
|
To fit |
Note | ||
Spray the connectors with Kontakt 61, part no. 30 04 520, before connecting. |
1. |
Lift the motor with rotor blades (D) into the frame. |
2. |
Fit the screws holding the fan motor (C).
|
3. |
Fit the connector to the clip (B).
|
4. |
Fit the fan motor cowl (A).
|
To fit the fan, .