Camshaft position sensor

/ 9-5 (9600) / 2004 / 2. Engine / Engine management system, V6 diesel / Adjustment/replacement / Camshaft position sensor

To remove

1.	Remove the intake manifold from the mass air flow sensor of the turbo.

2.	Remove the engine cover.

3.	Detach the connector.

4.	Remove the position sensor.

To fit

1.	Fit a new sensor.

2.	Plug in the connector.

3.	Fit the engine cover.

4.	Fit the intake manifold to the mass air flow sensor and the turbo. Tightening torque, mass air flow sensor: 3.5 Nm (2.5 lbf ft)

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.