Crankshaft position sensor

/ 9-5 (9600) / 2004 / 2. Engine / Engine management system, V6 diesel / Adjustment/replacement / Crankshaft position sensor

To remove

1.	Raise the car.

2.	Remove the lower engine cover.

3.	Remove the cover in the wheel housing.

4.	Detach the connector.

5.	Remove the position sensor.

To fit

1.	Lubricate the O-ring sparingly with vaseline and fit the position sensor.

2.	Fit the connector.

3.	Fit the cover in the wheel housing.

4.	Fit the lower engine cover.

5.	Lower the car.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.