Fuel temperature sensor, V6

/ 9-5 (9600) / 2004 / 2. Engine / Engine management system, V6 diesel / Adjustment/replacement / Fuel temperature sensor, V6

To remove

1.	Remove the intake manifold from the mass air flow sensor and the turbo.

2.	Remove the engine cover.

3.	Remove the connector from the sensor.

4.	Remove the sensor.

To fit

1.	Fit a new sensor. Tightening torque: 23 Nm (17 lbf ft)

2.	Plug in the connector.

3.	Fit the engine cover.

4.	Fit the intake manifold to the mass air flow sensor and the turbo. Tightening torque, mass air flow sensor: 3.5 Nm (2.5 lbf ft)

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.