SAAB WIS ONLINE

P0106

Read the instructions below then start the fault diagnostic procedure.

Symptom: CHECK ENGINE. Loss of performance.

P0106


Manifold Absolute Pressure Sensor Circuit. Performance Problem.


Fault symptom


CHECK ENGINE.

Loss of performance.


On-Board Diagnostics

Type of diagnosis:


- Continuous.


Enable criteria:


- Engine speed below or equal to 1050 rpm.

- Battery voltage should be 10.2-15.8 V.

- P0107, P0108, P1636 or P1637 should not be detected.

- Vehicle speed below 5 km/h.

- Injection quantity below or equal to 10 mm 3 /combustion.


Fault criteria:


- Difference between current boost pressure and atmospheric pressure exceeds 15 kPa for 8.4s.


Dependents:


- P0501, P0502, P0503, P1625, P1632 and P1633.


System reaction to a fault:


- The control module will continue to work with a substitute value that is equal to the atmospheric pressure. The following limitations apply: Pedal position sensor adjustable to max 60%, EGR and boost pressure control are switched off.


OK report:


- Fault criteria not fulfilled for 8.4s.


Fault handling: (See section Fault handling III, other emissions-related components and functions for more information)


- Type III.


Diagnostic help

Fault diagnosis concerns an electrical fault in connecting leads or in the sensor.

Functions in the diagnostic tool related to the fault:


- Read value: Charge Air Absolute Pressure, Atmosphere Absoslute Pressure


See also description of read value under "Read Values" menu for more information.