P0113

Read the instructions below then start the fault diagnostic procedure.

Symptom: CHECK ENGINE. Starting difficulties when cold.

P0113

Fault symptom

•	CHECK ENGINE.

•	Starting difficulties when cold.

On-Board Diagnostics

Type of diagnosis:

-	Continuous.

Enable criteria:

-	Turn Ignition On.

-	Battery voltage should be 10.2-15.8 V.

-	Coolant temperature should be over -10 °C.

-	P0116, P0117 or P0118 should not be detected.

Fault criteria:

-	Voltage on the input exceeds 4.974 V for more than 3.7s.

Dependents:

-

None.

System reaction to a fault:

-	The control module will continue to work with a substitute value of 50 °C.

OK report:

-	Voltage on the input falls below 4.974 V for more than 3.1s.

Fault handling: (See section Fault handling III, other emissions-related components and functions for more information)

-

Type III.

Diagnostic help

Fault diagnosis concerns an electrical fault in connecting leads or in the sensor.

Functions in the diagnostic tool related to the fault:

-	Read value: Intake Air Temperature ( Intake Air Temperature Sensor)

See also description of read value under "Read Values" menu for more information.

Checking the wiring

Jiggle the wiring harness at several points and in different directions to detect intermittent breaks and short circuits. Observe the multimeter, diagnostic tool or test lamp during the check.