P0335

Read the instructions below then start the fault diagnostic procedure.

Symptom: CHECK ENGINE. Loss of performance.

P0335

Fault symptoms

•	CHECK ENGINE.

•	Loss of performance.

On-Board Diagnostics

Type of diagnosis:

-	Continuous.

Enable criteria:

-	The engine speed exceeds 730 rpm

Fault criteria:

-	Faulty crankshaft signal for more than 15 crankshaft rotations.

Dependents:

-	P0200, P0216, P0261, P0262, P0264, P0265, P0267, P0268, P0270, P0271, P0273, P0274, P0276, P0277 and P1200.

System reaction to a fault:

-	The following limitations apply: Pedal position sensor adjustable to max 40 %, total fuel quantity max 30 mm 3 /combustion, engine speed fixed at 1000 rpm.

OK report:

-	Valid camshaft signal for more than 15 crankshaft rotations.

Fault handling: (See section Fault handling III, other emissions-related components and functions for more information)

-

Type III.

Diagnostic help

Fault diagnosis concerns an electrical fault in connecting leads or in the sensor.

See also description of read value under "Read Values" menu for more information.

Checking the wiring

Jiggle the wiring harness at several points and in different directions to detect intermittent breaks and short circuits. Observe the multimeter, diagnostic tool or test lamp during the check.