P1611
Read the instructions below then
start the fault diagnostic procedure.
Symptom: The engine will not start.
Immobilizer Wrong security Code
Fault symptom
|
•
|
The engine will not start.
|
On-Board Diagnostics
Type of diagnosis:
|
-
|
Once per driving cycle.
|
Enable criteria:
|
-
|
Wrong safety code in control module.
|
Fault criteria:
|
-
|
Wrong safety code programmed.
|
Dependents:
System reaction to a fault:
|
-
|
The engine will not start.
|
Fault handling:
(See section
Fault handling III, other emissions-related components and functions
for more information)
Diagnostic help
Someone may have tried to manipulate the immobilization function. The VIN in the control module may be incorrect.
Checking the wiring
Jiggle the wiring harness at several points and in different directions to detect intermittent breaks and short circuits. Observe the multimeter, diagnostic tool or test lamp during the check.
