P1614
Read the instructions below then
start the fault diagnostic procedure.
Symptom: The engine will not start.
Wrong Transponder response from TWICE
Fault symptom
•
|
The engine will not start.
|
On-Board Diagnostics
Type of diagnosis:
-
|
Once per driving cycle.
|
Enable criteria:
-
|
The code exchange between TWICE and ECM is faulty.
|
Fault criteria:
-
|
Incorrect response from TWICE
|
Dependents:
System reaction to a fault:
-
|
The engine will not start.
|
Fault handling:
(See section
Fault handling III, other emissions-related components and functions
for more information)
Diagnostic help
This could be caused by an incorrect or no transponder.
Checking the wiring
Jiggle the wiring harness at several points and in different directions to detect intermittent breaks and short circuits. Observe the multimeter, diagnostic tool or test lamp during the check.