P0243 5, P0244 3
Read the instructions below then
start the fault diagnostic procedure.
Symptom: CHECK ENGINE lamp on.
Limp home.
Loss of performance.
P0243 5
Boost Pressure To High. Mechanical Fault
P0244 3
Boost Pressure To Low Mechanical Fault
Fault symptoms
Conditions
The following conditions apply for this DTC:
•
|
Engine speed between 2250-2749 rpm and more than 40 mg fuel consumption.
|
•
|
Engine speed between 2750-3249 rpm and more than 25 mg fuel consumption.
|
•
|
Engine speed between 3250-4499 rpm and more than 20 mg fuel consumption.
|
•
|
P0243
Current boost pressure exceeds requested boost pressure for more than 4.5 seconds.
|
•
|
P0244
Current boost pressure below requested boost pressure for more than 4.5 seconds.
|
Diagnostic help
DTC limit lies between 25-50 kPa depending on fuel quantity and engine speed.
DTC indicates a mechanical fault in the turbo unit, air leakage between the turbo unit and intake manifold or in the vacuum system. There may also be a fault in the solenoid valve (boost pressure or swirl throttle).
Air leakage between the turbo unit and intake can cause the turbo unit to become damaged very quickly due to overrevving.