P0342
Symptom: CHECK ENGINE lamp on.
Limp home.
Loss of performance.
Pump Camshaft Position Sensor Circuit Malfunction. Internal Fault.
Fault symptoms
Conditions
The following conditions apply for this DTC:
|
•
|
No camshaft signal after 30 crankshaft signals.
|
Diagnostic help
The control module uses the speed from the crankshaft position sensor divided by 2 as a substitute value. A DTC is generated if the timing chain is damaged.
A DTC is generated if the timing chain is damaged.
Diagnostic procedure
See
Setting valve timing
