SAAB WIS ONLINE

Changing regulator with generator brushes, V6 diesel

Changing regulator with generator brushes, V6 diesel

To remove


In the method described below, the generator has already been removed.


1. Remove the generator protective cover.

2. Undo the regulator and pull it up.


The generator brushes are fixed to the regulator. The whole unit must be replaced with a new one.

To fit



1. Carefully straighten the spring tab so that it is in contact with the regulator. Clean and apply a thin layer of Vaseline to prevent oxidization.

2. Clean the ground connection on the regulator and apply Vaseline.

3. Refit the regulator.

4. Refit the protective housing on to the generator.

5. During replacement: check the battery, refer to Battery check and charge the battery if necessary, see Charging the battery .