Points to bear in mind when handling the battery
|
Points to bear in mind when handling the battery
|
Avoid disconnecting the battery unnecessarily.
1.
|
Make sure you connect the battery correctly. Connecting the wrong polarity on the battery can damage the car.
Therefore, always connect:
|
|
•
|
the plus battery cable (red) to the battery's positive terminal;
|
|
•
|
the minus battery cable (black) to the battery's negative terminal;
When connecting an external power source, e.g., another battery:
|
|
•
|
always connect positive terminal to positive terminal;
|
|
•
|
always connect negative terminal to ground.
|
2.
|
Never disconnect the battery when the engine is running.
|
3.
|
Do not boost-charge the battery other than in exceptional cases. One of the battery terminals must be disconnected while boost-charging.
Do not boost-charge batteries more than 2 years old.
Warning
|
The battery contains acid that is corrosive. If acid gets in the eyes rinse thoroughly with water for at least 10 minutes.
|
|
|
|
|
|
4.
|
Always wear rubber gloves and goggles when there is a danger of battery acid splashing.
|
5.
|
Make sure the battery always stands upright. Acid might otherwise leak out and cause injury or damage.
|
6.
|
Never place tools or other objects on top of the battery.
|
Important points to bear in mind
|
Never:
•
|
disconnect the battery while the engine is running;
|
•
|
remove the generator while the battery is connected;
|
•
|
test-run the generator in the car or on a test bench without connecting the battery;
|
•
|
connect the battery with incorrect polarity. The car can sustain damage.
|
Important
|
When performing electric welding on the car, the battery connection to the car body and all the generator connections must be disconnected to prevent electrical components from being damaged.
|
|