CD changer (4D)

/ 9-5 (9600) / 2004 / 3. Electrical System / Navigation with Audio / Adjustment/replacement / CD changer (4D)

To remove

1.	Open the boot lid.

2.	Remove the casing by pulling the edges outwards.

3.	Unplug the connector.

4.	Remove the nuts securing the brackets to the floor.

5.	Remove the CD changer from the brackets.

To fit

1.	Fit the brackets to the CD changer.

2.	Fit the nuts securing the brackets to the floor.

3.	Plug in the connector.

4.	Fit the casing by pressing it down.

5.	Close the boot lid.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.