SAAB WIS ONLINE

Range sensor (SPA), 4D

Range sensor (SPA), 4D

To remove


1. Remove the corner protection strips by inserting the removal tool, tool no. 82 93 474, between the bumper and the strip.


2. Detach the strip from the bumper.

3. Unplug the connector from the sensor.


4. Detach the sensor from the holder.


To fit


1. Plug in the connector to the sensor.


2. Fit the sensor in the holder.

3. Fit the strip.


4. Fit the corner protection strips.


Changing holder


1. First, press in the large snap-fastener and then the small snap-fasteners and remove the holder from the strip.


2. Press the new holder into the strip.