SAAB WIS ONLINE

(381-2482) Replacing the SID

Symptom: The warning message for low oil level is not displayed in SID.

MODIFICATION INSTRUCTION
Bulletin Nbr: 381-2482
Date: ........... Augusti 2004
Market: Enligt sep. lista
Replacing the SID

Customer Satisfaction Campaign 154 31

Cars in stock must be rectified before delivery.

A personal communication must be sent to the owners of cars already delivered requesting them to get in touch with the nearest Saab garage as soon as possible to have the fault rectified.

Cars affected

Saab 9-5 M04 with engine alternative D308L and D223L within Vehicle Identification Number range 43000001-43515247

Background

The warning message for low oil level can only be displayed in SID when starting with a warmed-up engine. In order that the warning message can be displayed in SID under all conditions the SID unit must be replaced.

Symptom description

The warning message for low oil level is not displayed in SID.



Parts required

12 758 907 SID

For fitting the modification identity plate:

12 785 148 Modification identity plate

16-30 15 815 Cleaning agent Teroson FL 875, sufficient for 50-100 cars.

Procedure

Before proceeding, check box A3 of the modification identity plate. From and including M04 there is the table "Table of Modifications" in the car's Warranty and Service Book. A modification identity plate must be fitted in accordance with the section "Fitting the modification identity plate" where local directives require the marking of the car. If the box is not marked, continue as follows.

Replace the SID in accordance with WIS - 3. Electrical System - Saab Information Display (SID) - Adjustment/Replacement - Control module (SID).

Note

For spare parts programming of SID use Tech2 software version 112.000. The Tech2 software is available in TIS2000 Edition 2004-2 update2 or TIS2000 Edition 2004-3.


Marking the modification identity plate

After carrying out the procedure, box A3 on the modification identity plate must be marked. From and including M04 there is the table "Table of Modifications" in the car's Warranty and Service Book. Mark the box with the number "7" if the procedure was carried out by the importer or with the number "8" if carried out by the dealer.

Fitting the modification identity plate

Note

A modification identity plate must only be fitted where local directives require the marking of the car.


Fit the modification identity plate in accordance with WIS - 9-5 M04 - General - General - Technical data - Plates and labels.

Warranty/Time Information

See separate information.