P0602
Read the instructions below then start the fault diagnostic procedure.
Symptom: CHECK GEARBOX warning lamp is on. TCM gearchanges are rougher than usual TCM in limp-home mode
| P0602 |
Control Module. Not Programmed
Fault symptoms
CHECK GEARBOX warning lamp is on.TCM gearchanges are rougher than usual
TCM in limp-home mode
Conditions
Ignition ON
Fault criteria
The control module is not programmed.This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
