Checking the wheels
| Checking the wheels |
Pressed steel wheels
On a correctly fitted wheel, radial runout A (out-of-round) must not exceed 0.6 mm. Runout B must not exceed 0.8 mm.Light alloy wheels
On a correctly fitted wheel, radial runout (out-of-round) must not exceed 0.5 mm. Runout B must not exceed 0.5 mm.| Important | ||
|
To avoid damage to the wheels during balancing, shims or spacers should be used as protection. |
||
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
