Impact sensor, front

/ 9-5 (9600) / 2004 / 8. Body / Airbag (SRS) / Adjustment/replacement / Impact sensor, front

To remove

1.	Remove the small grille on the side where the impact sensor is to be removed. Pull on the slat that is next to the bottom one while pressing a screwdriver against the catch.

2.	Remove the connector.

3.	Remove the impact sensor.

To fit

1.	Fit the impact sensor. Tightening torque 10 Nm (7.3 lbf ft)

2.	Plug in the connector.

3.	Refit the grille.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.