SAAB WIS ONLINE

Fitting an additional modification identity plate

Fitting an additional modification identity plate

To fit


1. Open the luggage compartment. Lift and suspend the floor panel.

5D : Lift up the upholstery covering the spare wheel and hook it onto the tailgate.

2. 4D : Bend the modification identity plate into a gentle arc against the sill.


3. Clean the area for the plate with Teroson FL T875. Remove the protective plastic backing from the plate.

4. 4D : Press the modification identity plate into place as shown in the illustration.


5. 5D : Press the modification identity plate into place as shown in the illustration. Refit the upholstery over the spare wheel.


6. Lower the floor panel and close the luggage compartment.