Oil filter
Oil filter |
To remove |
1. |
Remove the upper engine cover.
|
2. |
Unplug the EGR valve connector.
|
3. |
Remove the oil filter housing cover and take out the oil filter. Collect any spilled oil with a rag or similar.
|
To fit |
1. |
Change O-rings.
|
2. |
Fit a new oil filter and tighten the oil filter housing cover.
Tightening torque: 26 Nm (19 lbf ft). |
3. |
Plug in the EGR valve connector.
|
4. |
Fill with engine oil as specified, see
Lubricants
.
|
5. |
Start the engine and allow it to run until the oil pressure warning lamp has gone out.
|
6. |
Stop the engine and check the oil level after 2 - 5 minutes. Top up as necessary.
|