Engine oil and oil filter
|
Engine oil and oil filter
|
Change the oil. Fill top the MAX marking. The distance between the markings is equal to a volume of 1 litre (1,05 qt.)
Check the level when the engine is warm 2-5 minutes after the engine has been shut off.
Oil capacity
B205E, B235E: 4,0 litres (4,3 qt.) including filter
Oil type
See
Recommended oil grades.
Drain plug, tightening torque:
B205E, B235E: 25 Nm (19 lbf ft)
Check the oil level after engine oil and oil filter change.
1.
|
Loosen the oil filter with the strap wrench and unscrew the filter. Wipe the engine sealing surfaces clean.
|
2.
|
Oil the rubber gasket on the new oil filter and fit it. Tighten the filter by hand.
|
3.
|
Check for leaks from the filter after starting the engine.
|