Car will not start.
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Engine will not start/Engine stops.
Fault symptoms
Engine will not start/Engine stops.
Conditions
The following conditions apply for the current fault symptom:
-
|
No DTCs stored in the car with the fault symptom in question.
|
-
|
Starter motor in order.
|
-
|
Battery in good condition.
|
Diagnostic help
Most functions that are involved if the engine will not start or stops while running are monitored by self-diagnostics and thus generate DTCs if they are faulty.
Fault diagnosis covers faults that are not monitored and could make the engine either not start or stop while running.
Checking the wiring
Jiggle the wiring harness at several points and in different directions to detect intermittent breaks and short circuits. Observe the multimeter, diagnostic tool or test lamp during the check.