A/C relay
A/C relay |
When the A/C compressor is activated from ACC, DICE will send bus information "A/C ON" provided all other conditions are fulfilled. The value is used by ECM.
The control module then calculates the impending torque requirement of the compressor using the A/C pressure and then requests a corresponding increase in mm 3 /combustion. After a short delay, the control module will ground pin 38, which is connected to the A/C relay.
The control module activates the relay only when the engine has been started.
Diagnostics |
• |
If there is an open circuit or short circuit to ground, diagnostic trouble code P0646 will be generated.
|
• |
If there is a short circuit to B+, diagnostic trouble code P0647 will be generated.
|
System reaction to a fault
• |
AC relay disengages.
|
Note | ||
The A/C request from DICE can be read with the diagnostic tool. |