Evaporative emission canister
|
|
Evaporative emission canister
|
|
2.
|
Detach the purge line and the shut-off valve hose from the evaporative emission canister.
|
|
3.
|
Detach the lines from the fuel tank to the evaporative emission canister.
|
|
|
3.a.
|
Press in the connection towards the evaporative emission canister in the direction of the connection.
|
|
|
3.b.
|
Pinch the ring so that the catches go up.
|
|
|
3.c.
|
Detach the connection by pulling it away from the connecting pipe on the evaporative emission canister.
|
|
4.
|
Loosen the purge hose with tool 83 95 261.
|
|
5.
|
Undo the screw and remove the evaporative emission canister.
|
|
1.
|
Fit the evaporative emission canister, making sure it hooks securely to its holder and screw it tight.
|
|
2.
|
Reconnect the vent hose.
|
Note
|
|
Make sure the quick-release coupling is not damaged and that the indicator has been removed (round piece of plastic).
|
|
|
3.
|
Connect the shut-off valve hose to the evaporative emission canister.
|
|
4.
|
Connect the line from the fuel tank and then the line to the evaporative canister purge valve.
|
|
5.
|
Make sure all hoses and couplings are intact and secure.
|
