Vent device
Vent device |
To remove |
1. |
Raise the car.
|
2. |
Cut the cable tie.
|
3. |
Unplug and detach the connector to the vent device.
|
4. |
Detach the vent device from the filler pipe with a screwdriver.
|
5. |
Remove the vent device quick-release coupling from the tank as follows.
|
5.a. |
Press in the connector towards the tank in the direction of the connection.
|
5.b. |
Pinch the ring so that the catches go up.
|
5.c. |
Detach the connection by pulling it away from the tank.
|
To fit |
1. |
Fit the vent device.
|
2. |
Fit the vent device to the filler pipe.
|
3. |
Spray with Kontakt 61 and plug in the connector to the vent device.
|
4. |
Secure the cables with a cable tie.
|
5. |
Lower the car to the floor.
|