Intake air sensor, 4-cyl (688)

/ 9-5 (9600) / 2005 / 2. Engine / PSG 16 (D223L) / Adjustment/replacement / Intake air sensor, 4-cyl (688)

To remove

1.	Remove the upper engine cover.

2.	Unplug the temperature/pressure sensor connector.

3.	Remove the sensor.

To fit

1.	Clean the sealing surfaces and fit the temperature/pressure sensor with new O-ring. Tightening torque: 8 Nm (6 lbf ft)

2.	Plug in the sensor connector.

3.	Fit the upper engine cover.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.