Active surge dampening
| Active surge dampening |
This function suppresses the engine speed variations caused by oscillations in the engine, gearbox, drive shafts and engine mountings.
Calculations for the function are performed using the following parameters
| - |
Engine RPM
|
|
| - |
Engine speed/vehicle speed (i.e. gear position)
|
|
| - |
Fuel quantity
|
|
| - |
Clutch switch
|
|
| - |
Idle active
|
|
The result of the calculation is a correction quantity in mg/combustion for each cylinder. The limit for the range of correction is 10 mg/combustion.
The value from this function is added to the value from cylinder balancing.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
