SAAB WIS ONLINE

Charge air pressure sensor, V6

Charge air pressure sensor, V6

To remove


1. Remove the intake manifold from the mass air flow sensor to the turbocharger.


2. Remove the engine cover.

3. Unplug the sensor connector.

4. Remove the sensor.


To fit


1. Fit the sensor. Lubricate the O-ring sparingly with acid-free petroleum jelly.


2. Plug in the connector.

3. Fit the engine cover.

4. Fit the intake manifold to the mass air flow sensor and turbocharger.

Tightening torque, mass air flow sensor: 3.5 Nm (2.5 lbf ft)