SAAB WIS ONLINE

Menu "Activate"

Menu "Activate"

Note

Note

When a system function is activated with the diagnostic tool, the control module executes a command that is not functionally normal. In activating mode, the diagnostic tool controls the control module, for which reason the activation command should be used with care. An activated function is always reset after exiting activation mode and another selection is made in the diagnostic tool's menu.






Activate

Activating condition

Description

Value

Speed

Ignition ON

Speedometer values can be given. Tolerance 0-4 km/h above actual speed in the 0-140 km/h range. Tolerance 0-6.2 km/h at speeds above 140 km/h.

0-255 km/h

Engine speed

Ignition ON

Tachometer values can be given. Tolerance 2 % (140 rpm).

0-7000 rpm

Coolant temperature

Ignition ON

Temperature gauge values can be given. Tolerance angle of 3 degrees.

0-130 °C

Fuel level

Ignition ON

Fuel gauge values can be given. Tolerance angle of 3 degrees.

0-75 l

Display lighting

Ignition ON

Display lighting values can be given.

0-100 %

Instrument Lighting

Ignition ON

Instrument lighting values can be given.

0-100 %

Telltale Dimming

Ignition ON

Values for the brightness of indicator and warning lamps can be given.

0-100 %

Odometer

Ignition ON

Writes 888888.8, (all segments lit).

On/Off

Tripmeter

Ignition ON

Writes 888.8, (all segments lit).

On/Off

Selector lever position indicator lamps

Ignition ON

Select lever position. Control lamp brightness. Switch between lamps with selector lever.

0-100%

Warning and Indication Lights

Ignition ON

Control all lamps in MIU on/off irrespective of initial value to MIU.

On/Off