Range sensor (SPA), 4D
Range sensor (SPA), 4D |
To remove |
1. |
Remove the corner protection strips by inserting the removal tool, tool no. 82 93 474, between the bumper and the strip.
|
2. |
Detach the strip from the bumper.
|
3. |
Unplug the connector from the sensor.
|
4. |
Detach the sensor from the holder.
|
To fit |
1. |
Plug in the connector to the sensor.
|
2. |
Fit the sensor in the holder.
|
3. |
Fit the strip.
|
4. |
Fit the corner protection strips.
|
Changing holder |
1. |
First, press in the large snap-fastener and then the small snap-fasteners and remove the holder from the strip.
|
2. |
Press the new holder into the strip.
|