B2950
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Error message “PARKING ASSIST FAILURE” shown on the SID when reverse is selected.
The SPA stops measurement and acoustic signals are given by the SID when the SPA shuts down.
Sensor power supply. Shorted to ground
Fault symptoms
•
|
Error message “PARKING ASSIST FAILURE” shown on the SID when reverse is selected.
|
•
|
The SPA stops measurement and acoustic signals are given by the SID when the SPA shuts down.
|
Condition
The following conditions apply for the diagnostic trouble code in question:
•
|
Ignition switch in ON position
|
•
|
The sensor power supply is below approx. 4 V.
|
Diagnostic help
This fault diagnosis concerns electrical faults in connection cables or distance sensors.
For further information about readings, see
Menu "Read Values"
.