Programming, Anti-theft protection
| Programming, Anti-theft protection |
| General |
The anti-theft protection function is controlled by TWICE, which is programmed from the control module supplier. However, this basic programming cannot satisfy the requirements of all markets (countries) and additional programming may be needed during manufacture of the car. This is called “ Factory programming ”.
When the car has been delivered to a certain market, it may be necessary to replace TWICE or make other changes to the system. Under such circumstances it must be possible to carry out “ Aftermarket programming ”.
| Factory programming |
The following programming is done at the factory:
| • |
EOL programming (production)
|
|
| • |
Market programming (delivery service), see table below:
|
|
EOL programming
The control module is programmed in the car so that it can be identified by the car and can communicate with the other control modules (systems) in the car and can be combine programmed for immobilization.Market programming
A number of parameters for the anti-theft function are preset to suit the requirements of various markets (countries).| Important | ||
|
Some settings are not allowed in certain markets. |
||
| Programming |
|
Tech 2 commands
|
Alternatives
|
Market
|
Belgium has self-arming.
| After market programming |
The following programming can be carried out during “After market programming”:
| • |
Spare Part Programming
|
|
| • |
Immobilizer
|
|
| • |
Anti Theft System
|
|
| • |
Learn Transponders And Remotes
|
|
| • |
Self Arming
|
|
| • |
Selfarming Time
|
|
Spare parts programming
When TWICE is replaced, this must be programmed in the car so that the control module will function correctly according to specification.Immobilization
When TWICE is replaced, this must be combine programmed with the Main Instrument Unit and the Engine Management System to obtain the correct immobilization function. Otherwise the engine will not start.Anti-theft alarm
When an anti-theft alarm is retrofitted, a tilt sensor is added or a tilt sensor/glass breakage sensor is removed, TWICE must be programmed accordingly.Programming of transponders and remote controls
Replacement TWICE control modules include 2 car keys that are programmed in the new control module. If additional car keys, e.g. the old ones, are to be used, they can be programmed into the new control module. The control module must recognize them. A maximum of 4 car keys can be programmed at a time.Self-arming
The self-arming function is not programmed during delivery service (inactive). However, the function can be programmed later (active) and the arming time can be set as required.| Spare parts programming |
| Anti-theft alarm programming |
|
|
|
Menu - Tech 2
|
Alternatives
|
|
1
|
|
TWICE
|
|
|
2
|
|
Adjustment
|
|
|
3
|
|
Anti Theft Installation
|
Without alarm
Alarm - glass break sensor Alarm - glass break, tilt sensors |
| Programming of transponders and remote controls |
|
|
|
Menu - Tech 2
|
Alternatives
|
|
1
|
|
TWICE
|
|
|
2
|
|
Programming
|
|
|
3
|
|
Learn Transponders And Remotes
Further instructions on the procedure are given in the Tech 2 display |
|
| Self-arming |
|
|
|
Menu - Tech 2
|
Alternatives
|
|
1
|
|
TWICE
|
|
|
2
|
|
Adjustment
|
|
|
3
|
|
Anti Theft System
|
|
|
4
|
|
Self Arming
|
No
Yes |
| Self-arming time |
|
|
|
Menu - Tech 2
|
Alternatives
|
|
1
|
|
TWICE
|
|
|
2
|
|
Adjustment
|
|
|
3
|
|
Anti Theft System
|
|
|
4
|
|
Selfarming Time
|
0-2040 secs.
|
| Immobilization |
|
|
|
Menu - Tech 2
|
Alternatives
|
|
1
|
|
TWICE
|
|
|
2
|
|
Immobilizer
|
|
|
3
|
|
Select engine management system:
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
