Disconnecting the glass breakage sensor
Disconnecting the glass breakage sensor |
Disconnection |
The sensor is disconnected (with the key removed from the ignition) by holding down the NIGHT PANEL button for a few seconds. The tilt sensor is also disconnected.
Disconnection is confirmed with the message DOOR ALARM ONLY on SID. The car must then be locked within 3 minutes if the disconnection is to apply when the alarm is armed.
Connection |
The disconnection is cancelled the next time the car is unlocked or by pressing NIGHT PANEL again. SID will then display FULL THEFT ALARM.
Important | ||
If a fault arises in the glass breakage sensor, the CHECK message SERVICE THEFT ALARM will be displayed on SID. |
||