SAAB WIS ONLINE

Receiver for remote control

Receiver for remote control





General

The remote control receiver has an integrated loop antenna and is available in three models (EU, US/CA, JP with additional external antenna) for frequencies: 433.92 MHz and 315 MHz. It is located between the front seats in the rear of the centre console and is powered by +30 from fuse 9 and further connected to the TWICE control module on the following pins:

Ground

pin no. 13

Signal

pin no.14



Function

The integral antenna receives the transmitted code signal from the remote control. The signal is processed and sent on to TWICE, which is programmed to identify the car's remote controls. If the correct signal is received, the command is carried out.