SAAB WIS ONLINE

Rear window wiper 5D

Rear window wiper 5D

To remove


1. Remove the wiper arm.


2. Remove the window cover plates.

3. Remove the frame around the inner lock handle.

4. Remove the inner tailgate trim by undoing the screws securing the door pull and the plastic clips in the trim.

5. Pull down the top of the trim so that it comes away from the clips and then pull it backwards to release the clip by the door pull.


6. Unplug the connector.


7. Remove the three retaining screws.

8. Detach the washer hose.

9. Take out the wiper motor.

10. Remove the motor from the bracket.



To fit



1. Fit the motor to the bracket.

2. Fit the wiper motor and tighten the screws.


3. Plug in the connector and attach the washer hose.

4. Fit the wiper arm. The mark on the rubber seal should be pointing left.

5. Check the function, wiper parking position and washer operation.

6. Fit the inner trim by inserting the clip by the door pull and fasten to the clips. Screw in the two screws in the door pull.


7. Fit the frame around the inner handle.

8. Fit the window cover plates.